Input Signal Source - Sharp Aquos LC 37HV6U Operation Manual

Useful adjustment settings

Input signal source

TV CBL VCR DVD
/SAT /LD
TV
/DTV
POWER ANT-A/B INPUT
AV Virtual
MODE MTS CC
TWIN
PICTURE SELECT
Input selection
Can use for selecting the input source.
1
Press INPUT on the remote control unit or
on the Display.
2
Press INPUT on the remote control unit or
on the Display to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
NOTE
• Some items may be grayed out. They are not selectable.
Input signal setting
For setting the signal type of external equipment
connected to INPUT 1 or 3 terminals.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press SET/ENTER.
4
Press a/b to select a signal type you want
to set, and then press SET/ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
NOTE
• The System automatically sets input signals from
"INPUT2", "INPUT4" and "PC".
• If no (color) image displays, try to change the signal
type.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 3 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
52
MENU TV/SAT/DVD DTV/DVD TOP
RETURN MENU MENU
SOURCE DTV/SAT
POWER GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
Display
INPUT button
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
4. DVI
DVI input signal setting
The digital input signal switches automatically between
1080i, 720p and VGA or 480p. For VGA or 480p, set
manually following the steps as shown below.
The analog input signal also switches automatically
between 1080i, 540p and VGA, and it does not need
to be set manually ("Input Signal" does not appear in
the menu).
The DVI-HDTV terminal of this System supports the
HDCP* standard.
1
Press INPUT on the remote control unit or
on the Display and select "INPUT3", as
explained in Input selection.
2
Select "Auto" or "DVI" from the "Input Select"
menu for INPUT 3 signals, as explained in
Input signal setting.
3
Press MENU and TV MENU screen displays.
4
Press c/d to select "Setup".
5
Press a/b to select "Input Signal", and then
press SET/ENTER.
[ Setup ... Input Signal ]
TV MENU
Setup
Speaker
Input Signal
Parental CTRL
Position
Picture Flip
Language
6
Press c/d to select a signal type you want
to set, and then press SET/ENTER.
VGA
NOTE
• * What is HDCP (High-Bandwidth Digital Content
Protection)?
• HDCP is a copyright protection technology that uses
TMDS (Transmission Minimized Differential Signal).
• HDCP was developed to prevent the illegal copying of
DVI signals.
Option
[Internal]
[VGA]
[Standard]
[English]
480p