Other Viewing Options; Twin Picture Functions - Sharp Aquos LC 37HV6U Operation Manual

Other viewing options

Twin picture functions

Allows you to display two pictures on the screen at
one time.
Twin picture in all cases
You can display two same-sized pictures except when
inputting from a PC INPUT terminal.
TV CBL VCR DVD
/SAT /LD
TV
/DTV
POWER ANT-A/B INPUT
Virtual
AV
MODE MTS CC
1
Press TWIN PICTURE.
• Twin picture displays and a selected input
source image displays.
2
Press SELECT to set either screen to be
active.
• "z" displays on the active screen, which has
sound output.
3
Press TWIN CH a a a a a /b b b b b to select another
channel on the inactive screen.
4
Press SUB INPUT to select another input
source on the inactive screen.
• A selected image displays.
5
Press TWIN PICTURE to exit twin picture.
NOTE
• This function does not work under the following input conditions:
1PC INPUT mode,
2Two pictures from the same source (e.g. INPUT 1 and INPUT 1),
3HDTV signal source is input on the right side screen display.
• When this function is not available, "No dual screen display available"
will display.
• Pressing ANT-A/B while viewing in Twin Picture mode (TV image and
video image) with TV selected will display the TV image of the other tuner.
• Pressing ANT-A/B while viewing Twin Picture with video selected will
not change the image displayed.
• Pressing ANT-A/B while viewing Twin Picture with two TV images
displayed will not have any effect.
• Pressing ANT-A/B while viewing Twin Picture with two video images
displayed will switch the selected screen to a TV image.
TWIN
PICTURE
SELECT
VIEW SUB TWIN CH
MODE FREEZE INPUT
DISPLAY SLEEP LEARN
EDIT/
Picture and still image
You can display two same-sized pictures – one moving
and one still – when inputting from an AV source.
TV CBL VCR
/SAT
TV
/DTV
POWER ANT-A/B
AV Virtual
MODE
TWIN
PICTURE
VIEW
MODE FREEZE
DISPLAY SLEEP
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
1
Press FREEZE.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press FREEZE.
2
Update the still image by pressing SET/
ENTER.
• Each time you press SET/ENTER, the image
on the right screen updates.
3
Press FREEZE to exit still image.
NOTE
• This function does not work in PC input mode.
• When this function is not available, "No still image display
available." will display.
• The still image automatically goes out after 30 minutes.
DVD
/LD
INPUT
MTS CC
SELECT
SUB TWIN CH
INPUT
LEARN
EDIT/
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
FREEZE
67