Power Control For Pc Source; Power Save; Power Management - Sharp AQUOS LC-37HV4E Operation Manual

Basic adjustment settings

Power control for PC source

Power control allows you to reduce display brightness
and save energy.

Power save

1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "Power Save", and then
press ENTER.
PC MENU
Power control
Power Save

Power Management

4
Press c/d to select the desired backlight
brightness, and then press ENTER.
PC MENU
Power control
Power Save
Manual [0] –4
Auto
NOTE
• When setting to "Auto", the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
Setup
[Manual]
[Off]
+4
Power management
When set, the power will automatically shut down.
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "Power Management",
and then press ENTER.
PC MENU
Power control
Power Save
Power Management
4
Press a/b to select "Mode1" or "Mode2",
and then press ENTER.
PC MENU
Power control
Power Management
Selected item
• No power management
Off
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
Mode1
• The System turns on again by pressing
STANDBY/ON button on the Display or B
on the remote control unit. (See page 15.)
• If no signal inputs for 8 seconds, the power
shuts down.
Mode2
• When you start using the PC and the signal
inputs again, the System turns on.
Setup
[Manual]
[Off]
Off
Mode1
Mode2
Description
39