Initial Setup - Sharp Aquos LC 37HV6U Operation Manual

Watching TV

Initial setup

When you turn on the System for the first time, it will automatically memorize the broadcasting channels where
you live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 13.)
2. Connect the antenna cable to the AVC System. (See pages 17 to 19.)
3. Plug in the AC cord to the AC outlet. (See page 20.)
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press a/b to select the desired language
listed on the screen, and then press SET/
ENTER.
Antenna setting
NOTE
• Make sure what kind of connection is made with your
System when selecting "Air" or "Cable" for both ANT-A
and B.
2
Press c/d to select "Air" or "Cable" for ANT-
A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for ANT-
B.
Press SET/ENTER to enter the setting.
• This operation makes the System search for
both ANT-A and B.
ANT-A Air
ANT-B Air
ANT-A Air
ANT-B Air
22
English
Français
Español
Example
Cable
Cable
Cable
Cable
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT
RECEIVER
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
3
CH Search
ANT-A
CH Search
ANT-B
NOTE
• Make sure what kind of connection is made with your
System when selecting "Air" or "Cable" for both ANT-A
and B.
• If no channel is found, make sure what kind of connection
is made with your System and try EZ setup again (see
page 27).
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly
from the actual operations.
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL VOL
Example
Air [ 2 ]
Cable [ 2 ]
ANT-A
2