Input Signal (For Pc Input Mode); Dnr (Digital Noise Reduction); Picture Flip; Language - Sharp Aquos LC 37HV6U Operation Manual

Useful adjustment settings

Input signal (for PC input mode)

• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
640g400
640g480
1024g768
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
MENU
RETURN
SOURCE
POWER
FAVORITE CH
A
POWER INPUT
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Input Signal" and then
press SET/ENTER.
PC MENU
Setup
Speaker
Input Signal
Auto Sync.
Fine Sync.

Picture Flip

Language

4
Press a/b to select the desired input signal
on the display.
56
720g400
848g480
1280g768
TV/SAT/DVD DTV/DVD TOP
MENU MENU
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
B C D
VOL VOL
RECEIVER
[ Setup ... Input Signal ]
Option
[Internal]
[Standard]
[English]
Example
640 x 480
848 x 480

DNR (Digital Noise Reduction)

Produces a clearer video image.
MENU TV/SAT/DVD
RETURN MENU
SOURCE
POWER
SET/
ENTER
FAVORITE CH
A B
POWER INPUT
RECEIVER
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Option".
3
Press a/b to select "DNR", and then press
SET/ENTER.
• Some items may be grayed out. They are not
selectable.
[ Option ... DNR ]
TV MENU
Option
Audio Only
Input Select
DNR
Audio Out
Quick Shoot
4
Press a/b to select the desired level, and
then press SET/ENTER.
NOTE
• "DNR" is not selectable when channel display shows an
input resolution of 720P or 1080I.
DTV/DVD TOP
MENU
DTV/SAT
GUIDE
DTV/SAT
INFO
VCR REC
C D
VOL VOL
[Auto]
[Low]
[Fixed]
[Off]
Off
High
Low