Setting Mts/Sap Stereo Mode - Sharp Aquos LC 37HV6U Operation Manual

Watching TV

Setting MTS/SAP stereo mode

The System has a feature that allows reception of
sound other than the main audio for the program. This
feature is called Multi-channel Television Sound (MTS).
The System with MTS can receive mono sound, stereo
sound and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to second language, supplementary
commentary and other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
STEREO mode
ANT-A
38
STEREO
ANT-A
38
STEREO
ANT-A
38
MONO
Examples: when receiving MTS and SAP
MAINkSAP mode
ANT-A
38
MAIN
ANT-A
38
SAP
ANT-A
38
MONO
NOTE
• Once "MONO" mode is selected, the sound remains mono
even if the System receives a stereo broadcast. You must
switch the mode back to "STEREO" if you want to hear
stereo sound again.
• Selecting MTS while in the input mode does not change
the type of sound. In this case, sound is determined by
the video source.
TV CBL VCR DVD
/SAT /LD
TV
/DTV
ANT-A/B
POWER INPUT
AV Virtual
MODE MTS CC
TWIN
PICTURE SELECT
VIEW SUB TWIN CH
MODE FREEZE INPUT
STEREOkSAP mode
ANT-A
38
ST(SAP)
ANT-A
38
SAP(ST)
ANT-A
38
MONO
Each time you press
MTS, MTS toggles as
shown below.
MONO mode
ANT-A
38
MONO
ANT-A
38
MONO
ANT-A
38
MONO
25