Ver Coil Cleaning - Jackson TempStar Series Installation, Operation And Service Manual

OPERATING INSTRUCTIONS
OPERATION
SHUTDOWN &
10. Use a small wire or toothpick to remove remaining debris or lime deposits from
the nozzles.
CLEANING
11. Flush the arms with water.
12. Replace end-caps and ensure they have been tightened.
13. Spray or wipe out interior of the machine.
14. Replace wash and rinse arms.
15. Ensure sump strainer and scrap screen are clean and securely in place.
16. Use stainless steel polish to clean and protect outside of machine.

VER COIL CLEANING

The coil on the VER machine must be inspected periodically. If the coil is greasy,
here
dirty, or there is scale build-up, click for cleaning instructions.

16
07610-003-61-42-V