Table of Contents
Advertisement
OPERATING INSTRUCTIONS
OPERATION
SHUTDOWN &
10. Use a small wire or toothpick to remove remaining debris or lime deposits from
the nozzles.
CLEANING
11. Flush the arms with water.
12. Replace end-caps and ensure they have been tightened.
13. Spray or wipe out interior of the machine.
14. Replace wash and rinse arms.
15. Ensure sump strainer and scrap screen are clean and securely in place.
16. Use stainless steel polish to clean and protect outside of machine.
VER COIL CLEANING
The coil on the VER machine must be inspected periodically. If the coil is greasy,
dirty, or there is scale build-up, click
here
for cleaning instructions.
16
07610-002-23-32-AD
Advertisement
Table of Contents
