Jackson TempStar Series Installation, Operation And Service Manual page 5

REVISION HISTORY
Revision Revision
Letter Date
U 3-14-17
V 9-24-18
Made by Applicable ECNs
JH N/A
8392
8480
8533
JH 8536
8567
8576
8599
Added view showing dimensions for the notch cut into
table on corner installations to pg. 4.
Corrected total amps and typical electrical circuit for
230 V, 50 Hz, 1 Phase LT/NB machines on pg. 7 to 35
A and 40 A, respectively.
Corrected P/N for item 6 on pgs. 36 and 39.
Changed item 19 to item 17 in Tube Length Chart on
pg. 51.
Changed valve (item 15) view and P/N to 04810-003-
71-56 on pgs. 51 and 52.
Changed valve (item 7) view and P/N to 04810-003-
71-56 on pg. 53.
Removed views that showed pressure regulator in
certain locations. Created Plumbing Options, pg. 54,
with the pressure regulator and arrestor as options.
Added wash arm end-cap as item #21 to pg. 58.
Added external device wiring instructions.
Added instructions for programming new exhaust fan
timer.
Added rinse arm bearing replacement instructions.
Updated schematics.
Changed name of delime switch throughout from
NORMAL/DELIME to AUTO/MANUAL.
Updated Delime Instructions and added instructions
for low-temp machine.
Added water level probe cleaning to the Shutdown
and Cleaning section.
Updated to new manual format.
Audited and corrected all P/Ns in the manual.
Changed steam pressure to 10-30 PSI on pg. 5.
Updated electrical requirements, pgs. 6-7.
Added links to exhaust fan timer instructions to pg. 9.
Added Chemical Connections section to pg. 10.
Added Motor Rotation section to pg. 11.
Added new exhaust fan timer to pgs. 22 and 26.
Added fuses to pg. 24.
Changed P/N for contactor, item #4 on pg. 25.
Replaced thermostat and components with solid state
thermostat and components pgs. 31-36.
Added page for new rinse tank on pg. 38.
Updated P/Ns on pg. 39.
Updated motor P/Ns on pgs. 41-42.
Updated heater P/Ns on pgs. 43-44.
Added new phase conversion kit P/N to pg. 44.
Updated plumbing to new rinse tank plumbing on pgs.
45-46.
Updated VER plumbing to new rinse tank plumbing on
pg. 50.
Changed rinse arm bearing assembly on pgs. 52-53.
Changed rinse arm bearing kit P/N on pg. 53.
Updated pg. 54-55 with new view and parts list.
Added list of applicable kits to pg. 59.
Added new rinse tank schematics and updated others.
Details
v