Section 6: Maintenance; Schedule; Cleaning & Protecting - Grizzly G0855 Owner's Manual

SECTION 6: MAINTENANCE

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.

Schedule

For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
• Loose mounting bolts.
• Dust or debris on and around machine.
• Dull or damaged cutterhead knives/inserts.
• Unprotected cast-iron surfaces.
• Worn or damaged wires.
• Any other unsafe condition.
Monthly Check
• Clean and lubricate table ways, leadscrews,
and fence pivot points (Page 39).
• V-belt tension, damage, or wear.
• Clean/vacuum dust buildup from inside stand
and off of motor.
TT27914—Moly-D Machine & Way Oil ISO 68
Figure 44. T27914 Moly-D Machine & Way Oil.
-38-
Cleaning &
Protecting
The cleaning process for this machine is simple.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it. Treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning.
Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like G96 Gun Treatment, SLIPIT
®
Boeshield T-9.
®
G5562—SLIPIT® 1 Qt. Gel
G5563—SLIPIT® 12 Oz. Spray
G2871—Boeshield® T-9 12 Oz. Spray
G2870—Boeshield® T-9 4 Oz. Spray
H3788—G96® Gun Treatment 12 Oz. Spray
H3789—G96® Gun Treatment 4.5 Oz. Spray
Figure 45. Recommended products for
protecting unpainted cast-iron and steel.
Model G0855/G0856 (Mfd. Since 02/19)
, or
®