Supermicro X10DRG-O+-CPU User Manual page 90

X10DRG-O(T)+-CPU User's Manual
*If the item above "Confi gure SATA as" is set to AHCI, the following items will display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are Disabled and Enabled.
SATA Port 0-Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0-Port 5 Hot Plug
Select Enabled to support Hot-plugging for the selected SATA port which will al-
low the user to replace a device without shutting down the system. The options
are Disabled and Enabled.
Port 0-Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to initialize the
device. The options are Disabled and Enabled.
Port 0-Port 5 SATA Device Type
Use this item to specify if the SATA port specifi ed by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
*If the item above "Confi gure SATA as" is set to IDE, the following items will
display:
SATA Port 0-Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0-Port 5 SATA Device Type (Available when a SATA port is detected)
Use this item to specify if the SATA port specifi ed by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
4-20