Supermicro X10DRG-O+-CPU User Manual page 14

X10DRG-O(T)+-CPU/X10DRG-O-PCIE User's Manual
X10DRG-O+-CPU/X10DRG-OT+-CPU Jumpers
Jumper
Description
JBT1 Clear CMOS
JPB1 BMC Enable
JPG1 VGA Enable
JPL1 GLAN1/GLAN2 Enable
JPME2 Manufacturer (ME) Mode Select
JWD1 Watch-Dog Timer Enable
X10DRG-O+-CPU/X10DRG-OT+-CPU Connectors
Connectors
Battery (JBT1)
COM1
FAN1-FAN8
JF1
J31/J32, J33/J34
JL1
SP1
JPW21/22/23/24
JPW3-7, JPW12-18
JSD1/JSD2
JTPM1
LAN1/LAN2
IPMI_LAN
SP1
(I-)SATA 0-3
(I-)SATA 4/5
(S)-SATA0-3
I-SGPIO1/2
S-SGPIO
SW1
(FP) USB 0/1
Description
Onboard CMOS battery (See Chpt. 3 for used battery dis-
posal)
Backpanel COM Port 1 for front access
CPU/system cooling fan headers (Fans 1-8)
Front_Panel_Control header
PCI-E Slots (J31/J32: supported by CPU1), (J33/J34: sup-
ported by CPU2)
Chassis intrusion header
Onboard speaker header
SMCI-proprietary main power connectors
12V 8-pin power connectors (JPW17/JPW18: white power
connectors used for BPD HDDs only.)
Power connector SATA DOM
TPM (Trusted Platform Module)/Port 80 header
G-bit Ethernet (GLAN) ports 1/2
IPMI_dedicated LAN support by the Aspeed controller
Internal buzzer/speaker
Intel® SATA 3.0 connectors (0-3) from Intel® PCH
Intel® SATA SuperDOM connectors (I-SATA4/5) from
Intel® PCH
SATA connectors (0-3) from Intel® SCU
Serial_Link General-Purpose I/O (SGPIO) headers for I-
SATA connections (I-SGPIO1 for I-SATA0-3, I-SGPIO2 for
I-SATA4/5)
Serial_Link General-Purpose I/O (SGPIO) headers for S-
SATA connections (S-SATA0-3) supported by Intel® SCU
UID (Unit Identifi er switch)
USB 2.0 connections 0/1 for front access
1-6
Default Setting
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)