Supermicro X10DRG-O+-CPU User Manual page 17

CPU Board Features
CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel® E5-2600v3/v4 Series processors (Socket
R3) (LGA 2011); each processor supports dual full-
width Intel® QuickPath Interconnect (QPI) links (of
up to 9.6 GT/s one direction per QPI)
Note: E5-2600v4 requires Revision 2.0 BIOS
(or higher).
•
Integrated memory controller supports:
Up to 3072 GB of 288-pin Load Reduced (LRDIMM)
or 768 GB of Registered (RDIMM) DDR4 ECC
2400/2133/1866/1600 MHz in 24 slots.
Note: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM sizes
•
DIMM Up to 128GB at 1.2V
•
Intel® PCH C612
•
Four (4) PCI-E 3.0 x24 slots (J31/J32, J33/J34)
•
Graphics controller via the Aspeed AST2400 BMC
•
Intel® i350 Gigabit (10/100/1000 Mb/s) Ethernet
controller for LAN 1/LAN 2 ports (X10DRG-O+-CPU)
•
Intel® X540 10GbE (TLAN) Ethernet controller for
LAN 1/LAN 2 ports (X10DRG-OT+-CPU)
•
Aspeed 2400 Baseboard Controller (BMC) supports
IPMI_LAN 2.0
SATA Connections
•
SATA Ports
•
RAID
IPMI 2.0
•
IPMI 2.0 supported by Aspeed AST2400
1-9
Chapter 1: Overview
Ten (10) SATA 3.0 ports
•
I-SATA 0-3
•
I-SATA 4/5 (SuperDOM sup-
port)
•
S-SATA 0-3
RAID 0, 1, 5, 10