Installing The Software And The Electronic Manual Separately; Driver Installation Is Impossible - Roland DWX-4W User Manual

Installing the Software and the Electronic Manual Separately

Procedure

Log on to Windows as an "Administrator."

Insert the Roland Software Package CD into the CD-ROM drive of the computer.
When the automatic playback window appears, click [Run menu.exe]. If a [User Account Control] window appears,
click [Allow] or [Yes], and continue with the installation. The setup menu screen appears automatically.



Follow the on-screen instructions to proceed with the installation.

When the installation finishes, click

Remove the Roland Software Package CD.
With this machine, you can also install the driver, software, and electronic-format manual all at once. To install
all at once, see "
Setup Guide

Driver Installation Is Impossible

If installation quits partway through or when VPanel does not recognize the machine, the driver may not have been installed
correctly. In such cases, perform the following procedures. (If procedure A does not solve your problem, perform procedure B.)
Windows 8.1 / 10 (procedure A)
1. Connect the machine to the computer with the USB cable and turn on the machine.
2. Click [Desktop].
3. Right-click the [Start] button, and then click [Control Panel].
4. Click [View devices and printers].
5. Check that the model you are using is displayed under "Unspecified."
6. Right-click the icon of the model you are using, and then click [Remove device].
7. If the message "Are you sure you want to remove this device?" is displayed, click [Yes].
8. Check that the icon for the model you are using is no longer displayed under "Unspecified."
9. Temporarily disconnect the USB cable connecting the machine to the computer, and then reconnect the devices.
If the printer icon for the machine you are using is displayed under "Printer," the driver has been successfully installed.
If you could not solve your problem by following this procedure, perform the procedure under "Windows 8.1 / 10 (procedure B). "
Click [Custom Install] for the "DWX-4W Software."
Click [Install] for "VPanel" or "Manual."
on the setup menu.
" ( "Installing the Software") .
Installation Problems
4. Troubleshooting
73