Periodic Care And Maintenance; Cleaning The Waterproof Plate - Roland DWX-4W User Manual

Periodic Care and Maintenance

Cleaning the Waterproof Plate

Through use, the waterproof plate attached on the inside of the front cover will become dirty and visibility from the outside will
drop. By cleaning the waterproof plate regularly, visibility can be maintained, making it easy to check the status of operations.
CAUTION
Procedure

Hold this with
both hands.


Wash the waterproof plate with water.
After washing, wipe off any moister on the plate.


38
3. Maintenance
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a fire.
Make sure the power is off, and open
the front cover.
Remove the waterproof plate from the
inside of the front cover.
Slide the waterproof plate up, and remove it from
the protrusions on the front cover in 2 locations.
Attach the waterproof plate on the
inside of the front cover.
Make sure that the protrusions on the front cover
are seated firmly in the 2 locations on the plate.
The waterproof plate has a top, bottom, front, and
back side. Be careful of the orientation when install-
ing. If the orientation is not correct, the plate may
interfere with opening and closing the front cover.
Close the front cover.