Daily Care; Cleaning After Milling Finishes - Roland DWX-4W User Manual

Daily Care

Cleaning after Milling Finishes

After milling finishes, clean inside the machine with a dry cloth. Carefully wipe around the spindle head and the rotary axis
parts shown in the following figure as fluid and milling waste in these areas may affect milling results.
CAUTION
CAUTION
Procedure

Show VPanel.

P. 5 "Displaying VPanel"


34
3. Maintenance
Use a dry cloth to clean the inside of the equipment.
Failure to do so may cause the components inside the equipment to degrade,
which can lead to injury.
Be careful of the pointed portion inside the front cover.
There is a pointed portion inside the front cover. Exercise caution when cleaning.
Select a machine to operate.
Click the radio button to the left of the name of
the machine to operate.
Click in the top window.
The [Settings] screen will appear.
Click the [Maintenance] tab.
Click [Default <-> Cleaning].