Table of Contents
Advertisement
Displaying or Exiting VPanel
What is VPanel?
Displaying VPanel
Click
(VPanel icon) in the task tray on the desktop.
VPanel will be displayed. If you cannot find
the [Start] menu).
Starting from the Windows [Start] screen (or [Start] menu)
Windows 7 / 10
From the [Start] menu, click [All Apps] (or [Program]), then [Roland DWX-4W]. Then click [VPanel for DWX-4W].
Windows 8.1
Click
on the [Start] screen, and from the Apps screen, click the [VPanel for DWX-4W] icon under [Roland
DWX-4W].
VPanel serves as resident software.
VPanel works as resident software that is constantly working to manage the milling machine, send e-mails*, and so on. It is
recommended to configure the settings so that VPanel starts automatically when the computer starts. (
) Also, clicking
in the upper right corner of the window will cause the window to disappear from the screen, but
Tab"
the program will not be exited. While VPanel is running,
* E-mails are sent to notify of milling completion or errors that occur. (
VPanel is an application that allows milling machine
operation on a computer screen. It has functions to
output milling data, perform maintenance, and make
various corrections. It also displays milling machine er-
ror messages.
"Setup Guide" ("Installing the Software")
in the task tray, start the program from the Windows [Start] screen (or
is constantly displayed in the task tray.
P. 10 ""Mail" Tab"
P. 8 ""Settings"
)
1. Operation Screen
5
Hide quick links:
Advertisement
Table of Contents
