Care And Storage Of The Automatic Correction Jig; Care Of The Regulator Bowl - Roland DWX-4W User Manual

Care and Storage of the Automatic Correction Jig

The presence of rust, scratches, or grime on the automatic correction jig makes accurate detection impossible, which in turn
may make it impossible to perform milling as intended, and may even damage the machine.
Care and Storage
 Before use, wipe clean using a dry, clean cloth, and make sure that no dust, rust, or scratches are found.
 When the item will be out of use for a prolonged period, store in a location with low humidity and little fluctuation in
temperature.

Care of the Regulator Bowl

WARNING
WARNING
Procedure

Stop the supply of compressed air.

If the inside of the bowl becomes dirty, remove and wash the bowl.
Bowl
Be sure to bleed off the air pressure before removing the regulator bowl.
Failure to do so may result in a rupture or components flying off.
Clean the regulator bowl using a neutral detergent. Never use solvents such as
gasoline, alcohol, or thinner.
Using solvents may degrade the bowl and may result in a rupture.
Make sure that the pressure gauge reads "0."
Periodic Care and Maintenance
3. Maintenance
47