Instructions for use and other useful information Dealing with recyclable materials Do not dispose of electric equipment and batteries as household waste 1.2.3 Symbols in the illustrations The following symbols are used in illustrations: These numbers refer to the corresponding illustrations found at the beginning of these operating instructions The numbering reflects the sequence of operations shown in the illustrations and may deviate from the steps described in the text...
A copy of the declaration of conformity can be found at the end of this documentation. The technical documentation is filed here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany Product information products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products.
2.1.5 Electromagnetic compatibility Although the product complies with the strict requirements of the applicable directives, Hilti cannot entirely rule out the possibility of interference to the product caused by powerful electromagnetic radiation, possibly leading to incorrect operation. Check the accuracy of the device by taking measurements by other means English Printed: 28.09.2018 | Doc-Nr: PUB / 5455117 / 000 / 00...
Likewise, Hilti cannot rule out the possibility of interference with other devices (e.g. aircraft navigation equipment). The product complies with the requirements of class A; the possibility of interference in a residential environment cannot be excluded.
Laser range meter, belt pouch, wrist strap, 2x AAA battery (1.5 V), "Quick Start" guide, safety instructions, manufacturer's certificate, declaration of conformity Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group.
1. Flip the contact spike forward. 2. Open the battery compartment. 3. Insert the batteries. 4. Close the battery compartment and flip the contact spike back to the closed position. Switching the laser range meter on or off CAUTION Risk of injury! Do not direct the laser beam toward persons. ▶...
The default unit of measure can vary, depending on the country. 1. Simultaneously press the buttons and hold them down for 2 seconds. ➥ The unit of measure is changed. 2. Repeat step 1 until the unit of measure you want is set. The setting you select is saved as the new default setting.
Measuring using a target plate Use the target plate to measure distance under the following unfavorable conditions: • The wall is not sufficiently reflective due to the type of surface. • The target point is not on a surface. • The distance to be measured is too long.
2. Press the button. ➥ Measurement has been completed. The following values are shown on the display: • Previous measurement • Measured distance 3. For more single measurements, switch the laser on and repeat the procedure. 6.2.2 Measuring area 1. Aim the laser at a target point for the room length. 2.
4. Repeat steps 1 to 3 until you have measured all the wall lengths. 5. Aim the laser at a target point for the room height. 6. Press the button. ➥ Measurement has been completed. The following values are shown on the display: •...
6.2.4 Measure Pythagoras (2-point) 1. Aim the laser at the first target point. 2. Press the button. 3. Aim the laser as the second target point at right angles to the target distance. You can improve the result by activating the "Min/Max" function. Press the button and hold it down for 2 seconds to activate.
6. Press the button. ➥ Measurement has been completed. The following values are shown on the display: • Second length • Third length • Calculated result 6.2.6 Using the Layout function 1. Use the buttons to set the distance between the layout points. 2.
3. Take another measurement. If you are using the "Measure distance" function, the result appears automatically. If you are using the Area, Volume or Pythagoras function, you have to press the button after completing the regular process of measurement. The following values are shown on the display: •...
Bluetooth Smart enables you to transmit measured values to a mobile device using an app. You need an app from an official Hilti partner in order to use the function. Before using Bluetooth Smart, install an appropriate app on you mobile device.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling.