How To Use The Touchscreen - Fluke CertiFiber Pro User Manual

How to Use the Touchscreen

The touchscreen lets you use fingertip gestures to control the
tester. You can also operate the touchscreen with a stylus that is
made for projected capacitance touchscreens.
For correct operation and to prevent damage to the
touchscreen:
Touch the screen only with your fingers or with a

stylus that is made for projected capacitance
touchscreens. Do not use too much force.
Do not touch the screen with sharp objects.

The touchscreen will not respond if you tap it with
your fingernail or an incorrect type of stylus or if
you wear non-conductive gloves.
To use the touchscreen
To select an item on the screen, tap the item lightly with your

fingertip.
To scroll a screen, lightly touch the screen then move your

fingertip in the direction you want the screen to move.
 On FiberInspector screens, use the pinch and reverse-pinch
gestures to change the magnification on the screen. See
Figure 6.
To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with a mild detergent.
When you clean the touchscreen, do not let liquid
get under the plastic around the touchscreen.

Caution
Note

Caution
Chapter 1: Get Acquainted
How to Use the Touchscreen
21