How To Add A Result To A Saved Result - Fluke CertiFiber Pro User Manual

CertiFiber Pro Fiber Optical Loss Test Set
Users Manual
Tap the ID/Date control to sort the results by cable ID or by date.

When you sort by ID, the results show in ascending order. When
you sort by date, the latest result is at the top of the list.

How to Add a Result to a Saved Result

You can save the results from different tests in one cable ID. For
example, you can save CertiFiber Pro results and FiberInspector
results together in one ID.
When you add results, these settings used to get the results must
agree with the settings in the saved result:
Test limit

Fiber categories (singlemode/multimode, core size, category)

Index of refraction (makes a warning you can override)

If the settings do not agree, the tester shows a warning.
To add results for a different End setting for power meter and
FiberInspector tests
1 Do the test, then tap SAVE.
2 On the SAVE RESULT screen, select End 1 or End 2, make sure
the Cable ID and End name are correct, then tap SAVE.
To add results from a different test
1 On the home screen, tap the test setup panel.
2 On the CHANGE TEST screen, tap the button next to a test,
then tap USE SELECTED.
 If the ID set has a Last ID, the home screen shows the first
ID in the set that does not have results for the test you
selected.
If the ID set does not have a Last ID, tap the Next ID panel,

tap the Next ID box on the CHANGE ID screen, enter the
first ID for the set of saved results, then on the CHANGE ID
screen, tap DONE.
104