Fluke CertiFiber Pro User Manual page 104

CertiFiber Pro Fiber Optical Loss Test Set
Users Manual
A

Versiv main unit with CertiFiber
Pro module installed

One test reference cord

Fiber cleaning supplies
Figure 30. Equipment for Power Meter Measurements
To monitor power
1 Clean and inspect the tester's input port and the connectors
on the source and test reference cord.
2 Connect the tester to the source, as shown in Figure 31.
3 Turn on the source. On a CertiFiber Pro module, hold down
the button adjacent to the VFL port for 3 seconds.
4 On the home screen, tap TOOLS, then tap Power Meter /
Light Source.
5 The default mode for the power meter is Auto CertiFiber Pro.
If the source is not a CertiFiber Pro tester, tap  to select the
correct mode.
Figure 32 shows the power meter and its controls.
94
B


C
Video probe with USB connector
(DI-1000 shown)
AC adapter with line cords
(optional)
D
E
GPU137EPS