Chapter 8 Projects; Why Use Projects - Fluke CertiFiber Pro User Manual

Why Use Projects?

Projects help you monitor the status of a job and make sure that
your work agrees with the requirements of the job.
You can use a project to do these tasks:
 Specify the tests that are necessary for a job.
 Specify settings for tests.
 Specify an operator for the job.
 Make sets of sequential IDs to use as names for test results.
Automatically save test results with IDs from a set.

Add the results from other necessary tests to each saved result

in the project.
 See which IDs do not have results for a specified test.
 See what percentage of a job is completed.
See how many links passed and how many failed.

Keep the test results from a job in one place for easy access.

When you use a project, you can do tests and use IDs that are not
specified in the project if necessary. You can also easily change
the settings in a project if necessary.
It is not necessary to install a module to set up a
project for the module. The tester keeps all
settings in the main Versiv unit.
Chapter 8: Projects
Note
111