Safety Information - Fluke CertiFiber Pro User Manual

Safety Information


Table 1 shows the international electrical symbols used on the
tester or in this manual. Symbols for certifications and compliance
are on page 131.
: This key turns the tester on and off.
Warning: Risk of fire, electric shock, or personal injury.

Warning or Caution: Risk of damage or destruction to equipment

or software. See explanations in the manuals.
Warning: Class 1 (OUTPUT port) and Class 2 (VFL port) lasers. Risk of

eye damage from hazardous radiation.
Do not put products containing circuit boards into the garbage.

Dispose of circuit boards in accordance with local regulations.
To prevent possible fire, electric shock, or personal
injury:
 Use only AC adapters approved by Fluke Networks
for use with the tester to supply power to the tester
and charge the battery.
Do not put the battery pack in a fire or an

environment with temperatures more than 140 °F
(60 °C).
Do not use the tester in damp or wet environments.

Do not short-circuit or disassemble the battery pack.

 Do not use the tester if it is damaged. Inspect the
tester before use.
 Do not open the case; no user-serviceable parts are
inside.
 Do not modify the tester.
Table 1. International Electrical Symbols
 
Warning
Chapter 1: Get Acquainted
Safety Information
7