Disconnecting From Bluetooth; Setting The Bluetooth Standby Mode - Denon D-T1 Owner's Manual

Contents Connections

Disconnecting from Bluetooth

1
Press MODE while connected to Bluetooth.
The Bluetooth menu is displayed on the display.
2
Use ui to select "DISCONNECT", then press ENTER.
Disconnect the Bluetooth connection with the connected device.
Front panel Rear panel
Playback Settings

Setting the Bluetooth standby mode

When Bluetooth standby mode is turned on, the power of this unit
automatically turns on when a Bluetooth device connects to this unit while
the power of this unit is on standby, enabling you to listen to music via
Bluetooth.
1
2
3
4
0 Set "BT STBY" to "ON" and then set this unit to standby. The Bluetooth indicator
blinks.
0 The Bluetooth standby function cannot be used if there is no pairing information in
this unit. To use this function, connect this unit to a paired Bluetooth device.
Remote control 36
unit
Tips
Press Bluetooth to switch the input source to "BT
AUDIO".
Press MODE.
The Bluetooth menu is displayed on the display.
Use ui to select "BT STBY", then press ENTER.
The Bluetooth standby settings menu is displayed on the display.
Use ui to select the "ON" or "OFF", then press
ENTER.
Index
Appendix