Led Is Flashing - Denon D-T1 Owner's Manual

Contents Connections
o LED is flashing
Symptom
The lamp blinks in red in
0
0.25-second intervals and
"PROTECT" appears in the
display.
0
Front panel Rear panel
Playback
Protection circuit activated due to a rise in internal temperature. Turn off the power, wait for the set to fully
cool down, then turn the power back on. If the issue is not resolved after trying this solution, disconnect
the power of this unit and contact the repair center.
Core wires of two speakers are touching each other or a core wire is sticking out of the terminal and
touching the set's rear panel, activating the protection circuit. First unplug the power cord, then twist the
core wires tightly or terminate the speaker cables, then reconnect. If the issue is not resolved after trying
this solution, disconnect the power of this unit and contact the repair center.
Remote control
unit
Settings
Cause / Solution
52
Index
Tips Appendix
Page
66
66