Troubleshooting; Power Does Not Turn On / Power Is Turned Off - Denon D-T1 Owner's Manual

Contents Connections

Troubleshooting

If a problem should arise, first check the following.
1. Are the connections correct?
2. Is the set being operated as described in the owner's manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Power does not turn on.
0
0
Power automatically turns
0
off.
0
Front panel Rear panel
Playback
Check whether the power plug is correctly inserted into the power outlet.
This unit is in standby mode. Press X on the unit or POWER X on the remote control.
The sleep timer is set. Turn on the power again.
The unit is set to Auto standby mode. The Auto standby mode automatically switches the unit to standby
if there is no signal and no operations are performed for more than 15 minutes. To disable Auto standby
mode, press and hold the POWER X button on the remote control for more than 3 seconds when the
Auto standby mode is enabled.
Remote control
unit
Settings
Cause / Solution
51
Index
Tips Appendix
Page
22
24
47
48