Control Dock For Ipod/Ipod ® Playback; Disconnecting The Ipod - Denon RCD-M38 Owner's Manual

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
ON/STANDBY SOURCE
ON/STANDBY
[NUMBER]
[REPEAT]
[RANDOM]
SOURCE [6, 7]
[8, 9]
[USB/iPod 1/3]
[FOLDER MODE]
[DOCK 1/3]
[ENTER/MEMO]
[uio p]
[FOLDER +, –]
[TIME/DISPLAY]
[REMOTE/BROWSE]
Control dock for iPod/iPod ® playback
With this unit, you can listen to music on an iPod. It is also possible to
BUTTON
operate the iPod from the main unit or remote control.
<BUTTON>
[BUTTON]
<1/3>
"Made for iPod" and "Made for iPhone" mean that an electronic
accessory has been designed to connect specifi cally to iPod or iPhone,
respectively, and has been certifi ed by the developer to meet Apple
performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, iPod shuffl e, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
• The iPod may only be used to copy or play content that are not
copyrighted or content for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.
NOTE
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
• When connecting an iPhone to this unit, keep the iPhone at least
20cm away from this unit. If the iPhone is kept closer to this unit
and a telephone call is received by the iPhone, noise may be output
from this device.
Playback preparation (vpage 17 "Preparations").
1
2 Press [REMOTE/BROWSE]
The mode switches each time the button is pressed.
[Selectable mode]
Display location
Playable Audio fi le
fi les Video fi le
Remote control
Active
and main unit
buttons
iPod ®
3 Use to select the item, then press
[ui]
to select the music fi le to be played.
MEMO]
4
n Remote control and iPod button relations
Remote control
buttons
USB/iPod 1/3
DOCK 1/3
8
6
Press and hold
ENTER/MEMO
REMOTE/
BROWSE
REPEAT
RANDOM
n To switch the display
to select the display mode.
During playback, press
The display switches each time the button is pressed.
Browse mode Remote mode
Main unit display iPod display

Disconnecting the iPod

1
2
[ENTER/
Control dock for iPod operation
[DOCK 1/3]
Press <1/3> or .
Playback starts.
iPod operation
[USB/iPod 1/3]
Press or .
<1/3>
Playback starts.
iPod buttons Operation on this unit
13
Play the track / Pause the track.
13
Play the track / Pause the track.
Play the track from the beginning/
9 8 9
, ,
Play the next track.
7 8 9
Fast-reverse the track/Fast-
, ,
forward the track.
Press and hold
u i
Click Wheel Select an item.
,
Enter the selection or plays the
Select
p
track.
or
Switch between the browse
–
mode and the remote mode.
– Switch the repeat function
– Switch the shuffl e function
Display the menu or return to the
o MENU
previous menu.
[TIME/DISPLAY]
.
Title name / Title name /
Artist name Album name
Press to set the standby mode.
ON/STANDBY
Disconnect the iPod cable from the USB port.
ENGLISH
19