Denon D-T1 Owner's Manual page 34

Contents Connections
Listening to music on a Bluetooth
device
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Press Bluetooth to switch the input source to "BT
AUDIO".
When using for the first time, the unit will go into the pairing mode
automatically and "PAIRING" will appear on the display of the unit.
2
Activate the Bluetooth settings on your mobile device.
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
The Bluetooth indicator lights when pairing is complete.
Connect to the Bluetooth device while "PAIRING" is being
0
displayed on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 1 m).
Front panel Rear panel
Playback Settings
4
0 When this unit's name is not displayed in the screen on the Bluetooth device,
search for devices on the Bluetooth device.
0 Enter "0000" when the password is requested on the screen of the Bluetooth
device.
NOTE
0 The pairing mode on this unit lasts for approx. 5 minutes. When the pairing mode
on this unit is canceled before the pairing is completed, retry from step 1.
0 This unit cannot perform pairing against a Bluetooth device with a pass key other
than "0000".
Remote control 34
unit
Tips
Play music using any app on your Bluetooth device.
The Bluetooth device can also be operated with the remote
0
control of this unit.
The next time the input source is switched to "BT AUDIO", this
0
unit automatically connects to the last Bluetooth device that was
connected.
Index
Appendix