No Sound Comes Out; Volume - Denon D-T1 Owner's Manual

Contents Connections
o No sound comes out
Symptom
No sound comes out of
0
speakers.
0
0
0
0
0
0
0
0
0
0
0
0
Front panel Rear panel
Playback
Check the connections for all devices.
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
Securely tighten the speaker terminals. Check speaker terminals for looseness.
Check that a proper input source is selected.
Adjust the volume.
Cancel the mute mode.
Check the digital audio output setting on the connected device. The initial settings may be off depending
on the device.
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise and could damage the
speakers.
No sound is output from the speakers when headphones are connected.
To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device.
Remote control
unit
Settings
Cause / Solution
54
Index
Tips Appendix
Page
16
－
－
－
17
17
25
25
25
－
38
10
34