Te 730, Te 720 Keyboard Unit - HEIDENHAIN iTNC 530 HSCI Technical Manual

3.35 TE 730, TE 720 keyboard unit

364
TE 730, TE 720
NC operating panel in stainless steel design, for 15-inch, with touchpad
TE 730, TE 720 pin layout
Connector Function
X2: USB Type B USB connection with BF 750. The TE is connected with
the USB hub of the BF 750. The maximum permissible
cable length for this USB connection is 3 m. The USB hub
of the TE only supports USB 1.1.
X1 Screen soft keys of BF 750 X3 via ribbon cable to
keyboard unit X1
X60 Potentiometer of keyboard unit via ribbon cable to
machine operating panel X10
S, X11 Connection for spindle-speed override potentiometer
(pre-assigned by HEIDENHAIN)
F, X19 Connection for feed-rate override potentiometer. There
are two connections—preassigned by HEIDENHAIN
depending on the arrangement of the feed-rate
potentiometer.
E, X17 Connection for rapid-traverse override potentiometer.
There are two connections—preassigned by
HEIDENHAIN depending on the arrangement of the rapid-
traverse potentiometer.
F, X16 Connection for feed-rate potentiometer, alternative to
X19
E, X22 Connection for rapid-traverse override potentiometer,
alternative to X17
X27 Not used
Protective ground (M5)
HEIDENHAIN Technical Manual iTNC 530 HSCI