Modules, Markers And Words; Overview Of Modules - HEIDENHAIN iTNC 530 HSCI Technical Manual

5 Modules, markers and words

5.1 Overview of modules

July 2013
Module Function
9000/ Copy in the marker or word range
9001
9002 Read all inputs of a PLC input/output unit Not with HSCI
9003 Read the analog input of the MC and of
the PL 4xxB
9004 Edges of PLC inputs
9005 Update all outputs of a PLC input/output
unit
9006 Set and start PLC timer
9007 Diagnostic information of the PL 4xxB
9008 Read certain inputs of a PL 4xxB
9009 Update certain outputs of a PL 4xxB
9010/ Read in the word range
9011/
9012
9019 Size of the processing stack
9020/ Write in the word range
9021/
9022
9031 Overwrite machine parameters
9032 Read machine parameters
9033 Select machine parameter file
9034 Load a machine parameter subfile
9035 Read status information
9036 Write status information
9038 Read general axis information
9040 Read the axis coordinates
(format = 0.001 mm)
9041 Read the axis coordinates
(format = 0.0001 mm)
5.1 Overview of modules
SW version Page
1849
Not with HSCI
1528
Not with HSCI
1750
Not with HSCI
Not with HSCI
Not with HSCI
1850
1756
1851
484
485,
1739
492
493
622,
623,
658,
1162,
1531,
1508,
1530
621
1150
1151
583