Table of Contents
Advertisement
Turning On the Phone
To turn on the phone:
Enter
Press and hold down the
PIN
****
hear a click. The display will prompt you to enter your
PIN.
Enter your PIN. The digits appear as stars (*) in the
display. If you make a mistake while entering your PIN,
erase the faulty digit by pressing the
YES
Press
.
ERICSSON
If you have entered your PIN correctly, you will be welcomed
by your phone. The phone will then search for a network.
If the PIN is entered incorrectly three times in succession,
Note!
the SIM card will be blocked and you will have to unblock it
using your PUK code. See chapter “Security”.
When a network is found, the phone beeps three times. The
indicator light on top of the phone flashes green once every
second and your network operator’s name (in most cases ab-
breviated) is shown in the display. If you have the charger
connected, the indicator will show a steady green light instead
of a flashing green light.
You can now make and receive calls. This is called standby
"
NETWORK
%
mode.
&
12:35
Note!
You can disable the need for PIN entry through the Access
menu.
When No Network Name Is Displayed
NO
ON/OFF
(
) key until you
CLR
key.
Turning Off the Phone
Some features/menus are operator dependent
Emergency Calls Only
If the message
you are within range of a network but you are not allowed to
use it. However, in an emergency, you can call the emergency
number 911 (or 112, where applicable). See chapter “Making
and Receiving Calls”.
No network
If the message
is displayed, there is no net-
work within range or the received signal is too weak. You
have to move to obtain a sufficiently strong signal.
Networks
Tip!
Check the
menu to ensure tht your system is
PCS/Analog and your Analog options are set to A then B, or
B then A, depending on your carrier’s roaming agreement.
In standby mode, press and hold the
the display is turned off.
is displayed,
NO
ON/OFF
(
) key until
7
Advertisement
Table of Contents
