Ericsson CF888 User Manual page 30

Reading a Message
When you receive a message, a signal sounds and the display
informs you of it. The indicator light on the top of the phone
4 NewMessage 7
2 8
blinks rapidly green.
Read Now?
You now have two options:
If you want to read the message at once, press
4 NETWORK 7
If you want to read the message later on, press
2 22-Jul-978
message will be stored in the Messages memory and a let-
Mm 13:23
ter icon ( ) is shown to the left at the bottom of the
standby display. Press any key (0-9, *, #) to clear the New
Message message.
If you pressed you will see the first three lines of the mes-
YES
sage, showing you who the message is from and when it was
New R
12:54
received. If the number of the incoming call matches one of
From:l5551212
your phone book entries, the name will be presented (6 let-
ters or less). If no name is associated, the number will be pre-
sented. New stands for a new unread message.
If the message is older than 24 hours, the time will be re-
placed with the date the message arrived. However, you can
toggle between the date and time by pressing the * key.
Press to read the first line of the message.
YES
12:54
Scroll through the message using the navigation key.
From:l456807
takes you forward and
Hi John! R
RIGHT
through the message.
To move three lines forward, press 3. To move three lines
backward, press 1.
Press and hold
message.
.
YES
. The
NO
takes you backward
LEFT
to return to the beginning of the
LEFT
Some features/menus are operator dependent
The message Reply? appears after the last line of the mes-
sage. If the caller wants you to reply, the displayed message
Goodbye!
will say Reply Requested, Reply?, provided
L Reply?
your network supports this.
In Analog mode, the "From ...." message will not appear with
an SMS.
Replying to a Message
If you want to reply to a message, press
Your display now looks like this.
To enter your message, press
•
scribed in Composing and Sending Messages.
L New R
If you do not want to reply, press
If there is a phone number in the received message, you can
Tip!
call it by simply pressing
called, the message is considered read and it remains in the
Messages memory.
Embedded Numbers in SMS
Sending an Embedded Number in a
Message
When sending a message to another wireless phone, or when
asking someone to send a message to your Ericsson phone,
you should follow the guidelines listed below to ensure that
the phone retrieves the entire number from the message, dis-
plays it, and allows the phone user to dial the number by
pressing . This information does not in any way imply
YES
that the Ericsson phone is capable of receiving them, it is
.
YES
and proceed as de-
YES
.
NO
. After the number has been
YES
25