Table of Contents
Advertisement
Some features/menus are operator dependent
To Edit an Entry in the Phone Book
There are two ways of bringing up the Phone Book entry you
wish to edit. You can use either the storage position or the
name.
To edit the entry using the position:
From the Phone book menu, select Edit.
Enter the position number for the entry you wish to
edit.
EDIT
L Find pos R
For a position in the card memory, simply enter the
•
Position:
7
number.
For a position in the phone memory, press and hold
•
down the # key until the '¤' character appears and
then enter the number.
Press
to select the entry.
YES
You will now see...
EDIT
7
the name (displayed on the middle row).
•
Emma Limetree_
the phone number (displayed on the bottom row).
9195551212
•
the storage position (displayed on the top row).
•
Press the navigation key
wish to edit.
The cursor is positioned to the right on the selected
row.
Edit the row by using...
the
key to erase.
•
CLR
the numeric keys to enter letters or digits.
•
the navigation key to move the cursor left (or right
•
when it is positioned in a row).
If needed, press the navigation key
other row and continue editing.
Press
to save the changes.
YES
20
L Find name R
Name:
to select the row you
RIGHT
to select an-
RIGHT
To edit the entry using the name:
From the Phone book menu, select Edit.
Press the navigation key
The display now shows Find name in the middle
row.
EDIT
Enter the name for the entry you wish to edit, using the
numeric keys. The more letters you enter, the better the
Emma_
match.
Press
to select the entry.
YES
You can now continue from point 4 above.
When you edit using the name, you cannot scroll between the
Tip!
different entries that match the characters you entered. Only
the first match is displayed. In some cases therefore, it might
be easier to recall the number using the name to check the
storage position, and then use this to edit using the position.
Erasing a Phone Number
To erase a phone number from the Phone Book:
Recall the number using Name recall or
Position recall.
Press and hold
. The question Erase? appears.
CLR
Press
to erase the number.
YES
You can also select Erase from the Phone book menu
Note!
and then enter the storage position.
Should you want to erase all numbers from the phone mem-
ory (not possible for the card memory), you can do this as fol-
lows:
From the Phone book menu, select Erase all
from Phone.
.
LEFT
Advertisement
Table of Contents
