Ericsson CF888 User Manual page 34

SETTINGS
In the Settings menu, scroll to Data menus.
~ Data menus 
The current status (on or off) is now shown on the bot-
(On)
tom row of the display.
Press to change the status if needed (that is from
YES
off to on or vice versa). Then press
firm the setting.
Installing the Infrared Modem
Before you start
Make sure that the phone's IR port is activated.
To activate the IR port:
MENU
In the menu system, scroll to Activate IR port
Activate
and press . (If the IR port is already activated, the
~ IR port 
YES
display will read Deactivate IR port instead.
In this case, just press
menu.)
For a few seconds the text IR port activated
appears in the display. The phone then returns to
standby mode.
Place your phone less than one foot from your com-
puter (or your H/PC) and make sure that the infrared
MENU
Deactivate
ports are aligned (within 30°).
~ IR port 
The examples in this manual may differ from your PC. If you
require more information during the installation process than
provided by this User's Guide, we suggest that you consult
your PC supplier or your computer's manuals.
again to con-
YES
to return to the standby
CLR
Some features/menus are operator dependent
Step 1 – Check Infrared Support
Before installing the infrared modem you also need to check
if the Microsoft Infrared support for Windows version 2.0
has been installed.
It is recommended that you use Windows version 2.0 for op-
Note!
timal performance.
To do this, and also to check the version of the existing infra-
red support on your computer, do the following:
Under Settings in the Start menu, select
Control Panel.
Select Add/Remove Programs.
Check the version of the Infrared Support for Windows
95 in the list under the Install/Uninstall tab.
Version 2.0
•
If you have version 2.0 installed you do not need to in-
stall the infrared support. Go to section 'Step 4 – Install
Infrared Modem' to continue the installation of the in-
frared modem.
Version 1.0
•
If you have version 1.0, you need to uninstall this ver-
sion before installing infrared support version 2.0. Go
to 'Uninstall Infrared Support' to continue the installa-
tion of the infrared modem.
No Infrared Support Installed
•
Go to 'Step 3 – Install Infrared Support' to continue the
installation of the infrared modem.
Step 2 – Uninstall Infrared Support
Under Settings in the Start menu, select
Control Panel.
Select Add/Remove Programs.
29