Table of Contents
Advertisement
Turning On the Phone
1. Press and hold down the NO key until you hear a click. The
display will prompt you to enter your PIN code.
2. Enter your PIN code. The digits appear as * in the display. If you
make a mistake while entering your PIN code erase the faulty
digit by pressing the CLR key.
3. Press YES.
If you have entered your PIN code correctly, you will be welcomed
by your phone. The phone will then search for a network.
When a network is found, the phone beeps three times. The
indicator light on top of the phone flashes green once every second.
The display looks like this:
Country
Signal strength
meter
You can now make and receive calls. This is called standby mode.
When you are not using the phone, the illumination of the display
and keypad is automatically turned off after 10 seconds. Pressing
any key will turn the illumination on again.
EN/LZT 126 1353 R1B
Network
Battery
meter
Time
If the message Emergency calls only is displayed, you are within
rangeof a network but you are not allowed to use it. However, in an
emergency, you can call the international emergency number 112.
See chapter Making and Receiving Calls, p. 8.
When No Network is Displayed
If the message No network is displayed, there is no network within
range or the received signal is too weak. You have to move to
obtain a sufficiently strong signal.
The Display Language
The phone is normally, depending on SIM card, delivered with
English text in the display. To select a different language, see
Personalizing Your Phone, p. 19.
The Time
The time is shown at the bottom of the display. When the phone is
delivered the time is normally not set. To set the time, see Setting the
Time, Date and Alarm, p. 27.
How to Turn off the Phone
Press and hold down the NO key until the display is turned off.
5
Advertisement
Table of Contents
