Ericsson CF888 User Manual page 66

To Set the Alarm:
Select Set alarm from the Clock menu.
Scroll to the New time option by using the naviga-
tion key.
Press .
YES
Enter the time in hours and minutes.
Press .
YES
If you have chosen the 12-hour format in the Clock
Note!
mode function you can alternate between a.m. and p.m. by
pressing * and #.
To Turn the Alarm Off:
Press any key to turn the alarm off when it sounds.
Press if you do not want the alarm to be repeated.
YES
To Turn the Alarm Function Off:
Select Set alarm from the Clock menu.
Scroll to the Off option using the navigation key.
Press .
YES
The Call Time/Call Cost
During an outgoing call, the call time is shown in the display.
With the Call info function in the Settings menu
you can have the time displayed for all calls, both incoming
and outgoing, provided you have chosen the Time:All
option.
You can also have the call cost or the number of call units dis-
played if you select the Cost option, provided your net-
work and your SIM card support this feature.
Some features/menus are operator dependent
Checking Time or Cost of the Last Call
You can check the time/cost of the last incoming (or outgo-
ing) call with the Last call option in the Info menu.
Select the Info menu.
Press .
YES
Depending on the setting in the Call info function in
the Settings menu, you can check:
The elapsed time of the last outgoing call.
The elapsed time of the last incoming call provided you
have chosen the Time:All option in the Call
info function in the Settings menu.
Checking Total Call Time or Call Cost
Select Tot calls from the Info menu.
Press .
YES
Depending on the settings in the Call info function in
the Settings menu, you can check:
The elapsed time of all outgoing calls.
The elapsed time of all incoming and outgoing calls.
The cost (or the number of call units) of all incoming and
outgoing calls.
Call Cost information is not available in Analog mode.
Resetting the Total Call Time/Cost Meter
From the Info menu, select Tot calls.
Press . The message Reset? appears.
YES
Press to reset the meter.
YES
If you have chosen the call cost option you must enter the
Note!
PIN2 code to reset the meter.
61