Ericsson CF888 User Manual page 10

The Battery
Your mobile phone comes with a nickel metal hydride
(NiMH) battery. The battery is not charged when purchased,
but there may be enough power to turn on the phone.
Attaching the Battery to the Phone:
Place the battery on the back of the phone.
Removing the Battery
Make sure that the phone is turned off before removing the
battery. Then:
Press the battery upwards and
against the phone until you hear
a click.
Press the locking catch on
the bottom of the battery.
Some features/menus are operator dependent
Lift the battery up and away from the phone.
Charging the Battery
Make sure that the battery is attached to the phone. Then:
Connect the charger to the outlets. You will receive one
of the chargers pictured below.
A green indicator on the charger lights up. If not, make
sure you have inserted the plug to the charger correctly
(you may have to press hard).
If applicable, connect the clear plastic plug on the
charger cable to the charger. It is correctly inserted
when you hear a click.
5