Ericsson CF888 User Manual page 15

Some features/menus are operator dependent
Some operators may not support international dialing prefix
Note!
(+). You may be required to enter a specific code (ex: 011 for
USA).
Receiving a Call
When you receive a call, the phone rings and the indicator
4 Answer? 7 light on top of the phone rapidly blinks green. The display
2 8
shows Answer?.
8003742776
If your subscription includes the service Calling Line Identifi-
cation and the caller's network sends the number, you will see
the caller's number on the bottom row of the display. If the
number is stored together with a name in the phone book,
the name will be shown in the display.
The phone must be turned on and within coverage of a net-
Note!
work before a call can be received.
The active flip can be temporarily disabled by pressing and
holding the side volume key while opening/closing the flip.
To Answer the Call
Open flip. If already open, press
When the call is finished, press
To Reject the Call
There are two ways of rejecting the call:
Press the key.
NO
Press the volume key on the side of the phone twice.
The caller will hear a busy tone if the caller's network sup-
ports this function.
10
Redialing a Number
LAST Dialed
L
046998877
.
YES
, or close flip.
NO
If you press NO in Analog mode, the ringer will be muted,
and the phone will return to standby.
Your CF888 has a function that conveniently lets you redial
the last 15 phone numbers you have called. It can also redial a
number automatically if the connection failed when you first
called. This may vary depending on your SIM.
To Redial Previously Called Numbers
Press . The display now shows Call? together
YES
with the last dialed number.
Press the navigation key to the
number you want to call is shown on the bottom row of
R
the display.
Press to make the call.
YES
Should you want to clear the last dialed numbers memory, do
Note!
the following:
Press the navigation key to the
book menu appears.
Press to enter the Phone book menu.
YES
Press the navigation key to the
numbers function appears.
Press to select the Dialed numbers func-
YES
tion.
Press and hold the key. The question Erase
CLR
all? appears.
Press to erase the last dialed numbers from the
YES
memory.
Press to return to standby mode.
CLR
or until the
RIGHT LEFT
. The Phone
LEFT
. The Dialed
LEFT