HP E1725C Getting Started Manual page 46

Chapter 2 Practice Using the TIA
TIA Tutorial
"Frequency deviation from Fo as function of time. Fs=9.901 kHz;
Fo=100 MHz; 03/07/1994"
Where:
Fs = sampling frequency or the nominal measurement gate time for
each data point.
Fo = clock or carrier frequency used in the deviation calculations.
The date is the date the measurement was taken.
Immediately beneath this information is the graph title as entered on the
Setup>Display Setup menu, "Frequency Modulation".
The HP E1742A/43A/44A/46A/48A software prompts you for a graph title
the first time a measurement has been made. This title is retained for
subsequent measurements and can be modified by selecting
Edit>Display Setup.
The bottom portion of the display is a running log of the instrument status
and cursor readouts. This includes information about the data files that
have been loaded, the current pacing value in the measurement, the total
number of measurement points, etc. In addition, cursor information is also
displayed in this box. A scroll bar on the right hand side allows you to view
a running list of these results.
The cursor is a "crosshair" (+) which is controlled by the mouse when it is
positioned in the results area of the display. You can retrieve the current
mouse position by clicking the left mouse button.
2-20 Getting Started Guide