Chapter 1 How to Begin
Installing the HP E1742A/43A/44A/46A/48A Analysis Software
After the program files from disks 1 and 2 are copied to your disk, you will
be asked to insert disk 3 into the floppy drive. Insert disk 3 into the floppy
drive and click Continue. A new setup program will be launched to
install the Help system. You will see another "Initializing Setup..."
message, and then the opening screen for installing the Help system.
Follow the instructions on the screen.
When you are asked to select a directory to install the Help system files
(not the shared files to be placed in the Windows System directory),
enter the same directory you noted previously.
When the installation is complete, click the OK button. A new program
group "HP Applications" will be created. The HP E174XA software, a
"read-me" file and the Help icon will be placed in this program group.
Be sure to send in your registration card. This will ensure that you are
notified about software updates and other important product information.
1-10
Getting Started Guide