Chapter 2 Practice Using the TIA
TIA Tutorial
Configuring the TIA for a Measurement (Setup Menu)
1
Select the Instrument Setup window by clicking on Setup>Instrument
Setup... .
This window is used to specify the measurement hardware configuration.
The window is divided into five or six separate areas. Input Configure,
Trigger, Calibration & Errors, Reference, and Interface are common
to all HP E174XA products. You will only need to modify the Input
Configure and Trigger selections for most measurements. In most cases,
changes become effective when you click the OK button and close this
dialog box.
Getting Started Guide
2-7