Chapter 2 Practice Using the TIA
TIA Tutorial
Pacing
In general, the TIA does not have to time stamp every zero crossing of
the input signal to reconstruct the modulation or jitter on the signal.
Selection of Auto pacing allows the HP E174XA software to determine
the number of skipped zero crossings in order to capture the specified
number of samples in a given measurement time (as specified in the
Parameters for: field). You can directly specify the pacing by
"unchecking" the auto box, and entering the pacing value directly.
Input
Allows selection of the measurement channel to be used for data
acquisition and processing. The threshold parameters for each channel
are configured in the Setup>Instrument Setup... menu.
4
Click the Cancel button to close this window without making any
changes.
2-12
Getting Started Guide