Chapter 2 Practice Using the TIA
TIA Tutorial
To modify the X or Y scaling, highlight the number of interest and enter
the new value. If you don't know these values, click Get Autoscale
Values and the software will determine them for you.
If you click on the Show Points box, each measurement point will be
displayed with a "+" on the waveform presentation, and these points are
connected with a line.
Autoscale
Click on the Autoscale Always box to autoscale both the X and Y axis
to the acquired data with each new data acquisition.
The Get Autoscale Values button provides a convenient way to recall
the X and Y axis scale values. This is useful if you modify these values,
and then want to return to the autoscale configuration.
6
Click the Cancel button to exit the window without making changes.
2-14
Getting Started Guide