Table of Contents
Advertisement
Chapter 2 Practice Using the TIA
TIA Tutorial
Reference:
You can choose between three sources for the 10 MHz reference clock for
the HP E1740A:
•
Internal: clock reference provided by the HP E1740A internal
circuitry.
•
External: clock reference provided by the user via the input
connector on the front panel of the HP E1740A.
•
CLK10: clock reference provided by the VXI Slot 0 Controller via
the VXI backplane.
Interface
HP E1742A/43A/43A/46A/48A supports various interfaces.
Clicking on the Setup... button allows you to select and configure
the interface.
The interface configuration is not affected by recalling the Default
Setup Parameters.
One additional area on the Instrument Setup dialog box appears if you
are using the HP E1743A/44A:
Sample Rate
The Sample Rate parameter controls the maximum rate at which
the signal can be sampled. It does not control the rate at which the
signal is actually sampled. See the HP E1743A/44A on-line Help
for more information about Sample Rate.
2
Click on Cancel to close the HP E1740A Interface window.
Getting Started Guide
2-9
Advertisement
Table of Contents
