Table of Contents
Advertisement
[6]
[5]
[1]
[3]
8.10.15 Manual Feed Roller
8.10.15.1 Before Removing the Manual Feeding Roller
iR5065 / iR 5055 / iR5075 / / /
1) Remove the manual feeding pickup roller unit. (page
32)Reference[Removing the Manual Feeding Pickup Roller Unit]
8.10.15.2 Removing the Manual Feeding Roller
iR5065 / iR 5055 / iR5075 / / /
1) Remove the feeding roller [2].
- 1 resin E-rings [1]
[1]
8.10.16 Manual Separation Roller
8.10.16.1 Before Removing the Manual Separation Roller
iR5065 / iR 5055 / iR5075 / / /
1) Remove the manual feeding pickup roller unit. (page
32)Reference[Removing the Manual Feeding Pickup Roller Unit]
8.10.16.2 Removing the Manual Separation Roller
iR5065 / iR 5055 / iR5075 / / /
1) Remove the separation roller assembly [3].
[4]
[7]
[3]
[7]
[2]
[1]
Rear side
[7]
[4]
[5]
[6]
Front side
F-8-88
[2]
[1]
[3]
F-8-89
- 2 resin E-rings [1]
- 2 bushings [2]
2) Push the hook [1] using the driver etc. in the direction of the arrow to
remove the separation roller [2].
0015-5011
8.10.16.3 Adjusting the Pressure of the Manual
Separation Roller
8-
iR5065 / iR 5055 / iR5075 / / /
When picking up, if double feeding or failure occurs, adjust the position of
the pressure spring of the separation roller.
0015-5012
1) Detach the right cover (upper).
2) Remove the upper guide [1].
3) Move the mount [3] to adjust the position of the pressure spring of the
separation roller.
- If double feeding occurs, remove the mounting screw [2], lower the
mounting base [3] and tighten the screw [2] in the A hole.
- If pickup failure occurs, remove the mounting screw [2], raise the
mounting base [3] and tighten the screw [2] in the B hole.
0015-5013
8-
0015-5014
[1]
[2]
[3]
F-8-90
[1]
[2]
F-8-91
[1]
F-8-92
Chapter 8
[1]
0016-0026
8-33
Advertisement
Chapters
Table of Contents
Troubleshooting
