After Replacing The Inverter Pcb; Scanner Motor; Before Removing The Scanner Motor; Removing The Scanner Motor - Canon imageRUNNER 5065 series Service Manual

2) Detach the inverter PCB [5].
- 1 Connector [1]
- 1 Flat cable [2]
- 1 Screw [3]
- 2 PCB support [4]
[4]
[1] [3]
How to disconnect the flat cable
Slide the locking lever [1] in the direction of the arrow; then, disconnect the
flat cable [2].

5.4.7.3 After Replacing the Inverter PCB

iR5065 / iR 5055 / iR5075 / / /
Execute the following in the service mode.
1) White plate data adjustment (COPIER > FUNCTION > CCD > CCD-
ADJ).
2) ADF white level adjustment (COPIER > FUNCTION > CCD > DF-
WLVL1/2).
Be sure to perform white plate data adjustment before performing ADF
white level plate.

5.4.8 Scanner Motor

5.4.8.1 Before Removing the Scanner Motor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the reader rear cover. (page 10-16)Reference[Detaching the
Reader Rear Cover]

5.4.8.2 Removing the Scanner Motor

iR5065 / iR 5055 / iR5075 / / /
[1]
F-5-62
[2] [4]
[5]
F-5-63
F-5-64
1) Pull out the cover [2].
- 4 Screw [1]
2) Remove the 2 reuse bands [2] from the cover [1].
3) Move the scanner motor [3] in the direction of the arrow to pull out.
- 3 Screw [1]
- 2 Spring [2]
0015-9958
4) Detach the scanner motor [2].
- 1 Connector [1]
0015-4834
0015-4836
[1]
[1]
F-5-65
[1] [2]
F-5-66
[3] [2]
[1] [2]
F-5-67
[2]
F-5-68
Chapter 5
[2]
[1]
[1]
5-21