SATO GT 410 Operator's Manual page 85

Unit 5: Troubleshooting
ERROR SIGNALS
Error No. LCD Display
17
18
19
20
21
SATO GT4xxe Series Operator Manual
BCC Check error
Cause: BCC attached to sending data (for an item) is different.
Remedy: Ensure the data communication settings are correct.
Alarm sound: Three short beeps.
External signal: Machine error.
Item Number error
Cause: The sequence number of present and past print data (for
an item) does not match.
Remedy:
Ensure data communication settings are correct.
Alarm sound:
Three short beeps.
External signal: Machine error.
Winding Full error
Cause(s): 1. The label rewinder needs to be emptied
2. The sensor is malfunctioning
Remove the wound label.
Remedy:
Three short beeps
Alarm sound:
Machine error
External signal:
Head Density error
Cause(s): 1. The print head is not correctly installed.
2. An unsupported print head is installed.
Ensure the print head is suitable for use with this printer
Remedy:
and that it is properly installed.
Alarm sound: Three short beeps.
External signal: No output.
Kanji ROM error
Cause: Invalid Kanji data has been read from the Kanji ROM
Remedy: Ensure the Kanji ROM has been properly installed.
Alarm sound: Three short beeps
External signal: Machine error
PN 9001138A
Description
Page 5-5