SATO GT 410 Operator's Manual page 72

Unit 4: Operation
MENU
RIBBON TENSION
ADJUSTMENT
ENABLE DISABLE
FUNCTION KEY
NONE
REPRINT
SBI MODE
FUNCTION KEY
NONE
REPRINT
SBI MODE
FORWARD/BACKFEED
DISTANCE
DEFAULT 000mm
EXT 9PIN SELECT
MODE1 MODE2
PRIORITY SETTING
COMMAND INTERNAL
SET PASSWORD
ON OFF
SATO GT4xxe Series Operator Manual
SERVICE MODE (4-19)
T o enable or disable the control of ribbon rewind speed.
When enabled, the printer will monitor ribbon usage and notify
when the loaded ribbon is low.
Allows the setting of a function key.
Allows the backfeed distance to be set. If using thermal transfer
for printing, set the feed distance less than 30mm to avoid
detection of ribbon end by accident.
Allows selection output mode options. Mode 1 outputs signal in
the status of existance/non-existance for the number of
remaining labels to be printed. Mode 2 outputs signal in the
status of online/offline.
Displays the validity/invalidity of command data for print
darkness, print speed, start point correction, operation mode,
print method, and sensor types.
Allows the password function to be enabled and disabled.
PN 9001138A
DESCRIPTION
Page 4-44